Skip to content

Spindle Assembly for Scag 46631, 461663

$ 47.99

Fits the following application

  • Fits some specific Scag zero turn Tractor

Compatible with

  • Scag 461663, 46631
  • Stens 285-597
  • Rotary 9153
  • Oregon 82-325

Specification

  • 7-1/4 inch overall height
  • 1-1/8 inch shaft outer diameter
  • Cast Iron Housing
  • New style with taper roller bearings
  • With grease fitting

Packing

  • One pc per box

Customer Reviews

Based on 32 reviews
66%
(21)
3%
(1)
13%
(4)
6%
(2)
13%
(4)
l
louise sheldon
Wrong shaft size

Manufactured well but the shaft was the wrong size so I will only rate it3 stars

L
Lisa Shaffer
These spindles are garbage!

I ordered these spindles for my scag mower. They bolted up fine and looked fine. After installing all 3 spindles I found 1 of them was bent! I couldn't get the bolt through that holds the blade. I tried all 3 bolts but none would go through the spindle. I removed that spindle and replaced it with one of the ones I took off. After greasing them and cutting grass for 6hrs 1 of the remaining 2 spindles had grease coming out the bottom of the spindle! I will NOT be using these again.

A
Amazon Customer
Perfect Replacement...

I am all about using OEM parts on my vehicles and power equipment, but for the money and time - this replacement spindle fit the bill. Mowing season is critical as I have better than four plus acres. I can't afford to be down for even a week during the growing season. To be sure - OEM replacement spindle assemblies were readily available at over $200 a piece plus the two-hour round-trip. I received this replacement the next day and was ready to get back to mowing in less than an hour. This replacement will buy me the time I need to be able to rebuild the OEM spindle, thus giving me a spare to have on hand for way less than the $200 plus dollars and drive-time it was going to cost me. The dimensions were exact to the OEM which is always a concern in keeping that perfect mowing height. I couldn't be happier with it so far...

K
Kindle Customer
Would recommend and will buy again!

This part was a perfect replacement for the spindles on my 2000 model Scag 48" cut! Very well made and heavy duty! Plus much friendlier to my wallet than dealer item! Received very quickly !

D
David
Not a perfect-fit replacement for Scag 461663

1. The quantity of "extra" threads at the bottom of the Raisman spindle shaft, caused the blade to be mounted about 1/4" lower than the other 2 blades (which still have the original Scag spindles).2. The Raisman keyway is machined a bit too wide, and makes the fit of the key too sloppy.3. When I applied grease (with my hand greasegun) for the first time on this Raisman spindle (before I installed it), the top seal pushed out the top; I tried to push it back in but am unsure if it's back in its proper position. This shouldn't happen, since there's a grease pressure relief fitting on the spindle assembly.

Customer Reviews

Based on 32 reviews
66%
(21)
3%
(1)
13%
(4)
6%
(2)
13%
(4)
l
louise sheldon
Wrong shaft size

Manufactured well but the shaft was the wrong size so I will only rate it3 stars

L
Lisa Shaffer
These spindles are garbage!

I ordered these spindles for my scag mower. They bolted up fine and looked fine. After installing all 3 spindles I found 1 of them was bent! I couldn't get the bolt through that holds the blade. I tried all 3 bolts but none would go through the spindle. I removed that spindle and replaced it with one of the ones I took off. After greasing them and cutting grass for 6hrs 1 of the remaining 2 spindles had grease coming out the bottom of the spindle! I will NOT be using these again.

A
Amazon Customer
Perfect Replacement...

I am all about using OEM parts on my vehicles and power equipment, but for the money and time - this replacement spindle fit the bill. Mowing season is critical as I have better than four plus acres. I can't afford to be down for even a week during the growing season. To be sure - OEM replacement spindle assemblies were readily available at over $200 a piece plus the two-hour round-trip. I received this replacement the next day and was ready to get back to mowing in less than an hour. This replacement will buy me the time I need to be able to rebuild the OEM spindle, thus giving me a spare to have on hand for way less than the $200 plus dollars and drive-time it was going to cost me. The dimensions were exact to the OEM which is always a concern in keeping that perfect mowing height. I couldn't be happier with it so far...

K
Kindle Customer
Would recommend and will buy again!

This part was a perfect replacement for the spindles on my 2000 model Scag 48" cut! Very well made and heavy duty! Plus much friendlier to my wallet than dealer item! Received very quickly !

D
David
Not a perfect-fit replacement for Scag 461663

1. The quantity of "extra" threads at the bottom of the Raisman spindle shaft, caused the blade to be mounted about 1/4" lower than the other 2 blades (which still have the original Scag spindles).2. The Raisman keyway is machined a bit too wide, and makes the fit of the key too sloppy.3. When I applied grease (with my hand greasegun) for the first time on this Raisman spindle (before I installed it), the top seal pushed out the top; I tried to push it back in but am unsure if it's back in its proper position. This shouldn't happen, since there's a grease pressure relief fitting on the spindle assembly.

★ Customer Reviews ★

★ Customer Reviews ★

9592 reviews
81%
(7787)
11%
(1030)
4%
(339)
3%
(245)
2%
(191)

We have not received our part

Exact fit.

All bolts, pulleys and keyways fit without any issues. Spindle bearing was in a sealed plastic bag to keep bearing cover with it so it couldn't get lost, as well as visable inspection of the parts.

Perfect Fit, works great

I replaced one Spindle on my Hustler Sport Zero Turn, this was a perfect fit. Solid, heavy, appears well built.Only extra comment -- no replacement bolts provided (many youtuber's broke them removing); I didn't break any (whew). Could add as an Extra for $2.00 to include Bolts? Approx 5/16 x 2 inch, hardened; 9/16 bolt & nutWorks great, was easy to replace; will use this seller, this item again if I need to replace 2 or 3 on my Zero Turn. Much quieter now.Oh, one extra thing that was included, rarely seen from Amazon -- a Packing slip!

It works and fits right

It's awesome 👌

Perfect fit for 54" Craftsman Zero turn mower with a KT735 Kohler engine.

Perfect fit for 54" Craftsman Zero turn mower with a KT735 Kohler engine. Quickest shipment and delivery ahead of schedule.

B2B