Skip to content

Spindle Assembly for Scag 6020, 461397, 46400, 48926, Ferris 1530301, Encore 71460007

Sold out
$ 41.99

Fits the following application

  • Fits SCAG commercial walk behind mower

Compatible with

  • Encore 71460007
  • Ferris 1530301, 30301, 5030301, 5061033
  • Scag 46020, 461397, 46400, 48926

Specification

  • 7-3/16 inch overall height
  • 5/8 inch shaft inner diameter
  • 1 inch shaft outer diameter
  • 1/4 inch keyway
  • With grease fitting

Packing

  • One pc per box

Customer Reviews

Based on 11 reviews
55%
(6)
9%
(1)
18%
(2)
9%
(1)
9%
(1)
m
marc philibert
Amazon is The new future of lawn mower parts

They worked great on my ferris walk behind lawn mower. I will definitely buy again.

b
brian r.
Excellent

Excellent product

J
James LaPlaca
didnt work

I am sending the spindles back. The key way wasn't milled deep enough so the pulleys wouldn't go on the spindle shaft.

d
dustin t.
Great quality product

The spindles were a perfect match and easy to install.

A
Amazon Customer
Requires modification to work

The 8TEN spindle is much lighter than the original and the key way is shorter and cut with a slope on the bearing end. Had to cut the shaft key to shorten it and getting the two center belt pullies on with the key wanting to slide out the sloped key slot was a bit of a pain. The key way in the shaft needs to be cut (manufactured) square! Have not run the bearing any measurable amount of time to know if it will hold up so I went with a three rating.

Customer Reviews

Based on 11 reviews
55%
(6)
9%
(1)
18%
(2)
9%
(1)
9%
(1)
m
marc philibert
Amazon is The new future of lawn mower parts

They worked great on my ferris walk behind lawn mower. I will definitely buy again.

b
brian r.
Excellent

Excellent product

J
James LaPlaca
didnt work

I am sending the spindles back. The key way wasn't milled deep enough so the pulleys wouldn't go on the spindle shaft.

d
dustin t.
Great quality product

The spindles were a perfect match and easy to install.

A
Amazon Customer
Requires modification to work

The 8TEN spindle is much lighter than the original and the key way is shorter and cut with a slope on the bearing end. Had to cut the shaft key to shorten it and getting the two center belt pullies on with the key wanting to slide out the sloped key slot was a bit of a pain. The key way in the shaft needs to be cut (manufactured) square! Have not run the bearing any measurable amount of time to know if it will hold up so I went with a three rating.

B2B