Skip to content
Ignition Coil for Briggs & Stratton 395491, 397358

Ignition Coil for Briggs & Stratton 395491, 397358

$ 16.99

Fits the following application

  • Briggs & Stratton 5 HP Vertical and Horizontal Engine

Compatible with

  • Briggs & Stratton 298316, 395491, 397358, 697037
  • John Deere PT10998
  • OREGON 33-340
  • STENS 440-401
  • ROTARY 7288
  • SUNBELT B1BR2

Specification

  • Electronic CDI
  • Coil assembly include coil, cable

Packing

  • One piece per poly bag

Customer Reviews

Based on 46 reviews
80%
(37)
13%
(6)
2%
(1)
4%
(2)
0%
(0)
J
Jason
This will not fit Troy bilt

Well built

R
Ryan
Works great. Be careful if it’s going on a generator

Completely replaces the condenser and points. That could be an issue for some generators that use the voltage to charge the generator windings. Beware of that.

A
Ann M Miller
Worked

Worked for a old rototiller

R
Robert B.
Missing rivet that mounts sheet metal baffle (like most of these aftermarket coils)

I ordered this as being compatible with Briggs 397358. There should be a rivet with a raised head (space under it) for mounting a metal baffle on the engine. This coil doesn't have one so I am returning it and it could have been easily prevented if the seller had only had photos of both sides! Frustratingly, even the Stens website has only a single photo so you just can't tell.I have ordered a DZE 4026 also from Amazon (which is the actual box that Stens is selling with their own label added). It's $8 cheaper AND the photos show the rivet present. We shall see.Update 11/4: The DZE 4026 arrived today. Sad to say, the photos in the listing for it are wrong, it has no rivets either. At least it is cheaper than the identical one with the Stens label.

J
John
Good quality and turned an old non-starting engine into an easy starting one

Good quality, eliminates the need to deal with the points and condenser.A close air gap makes for easier starts. Often it's one or two pulls now instead of not starting at all.

123

Customer Reviews

Based on 46 reviews
80%
(37)
13%
(6)
2%
(1)
4%
(2)
0%
(0)
J
Jason
This will not fit Troy bilt

Well built

R
Ryan
Works great. Be careful if it’s going on a generator

Completely replaces the condenser and points. That could be an issue for some generators that use the voltage to charge the generator windings. Beware of that.

A
Ann M Miller
Worked

Worked for a old rototiller

R
Robert B.
Missing rivet that mounts sheet metal baffle (like most of these aftermarket coils)

I ordered this as being compatible with Briggs 397358. There should be a rivet with a raised head (space under it) for mounting a metal baffle on the engine. This coil doesn't have one so I am returning it and it could have been easily prevented if the seller had only had photos of both sides! Frustratingly, even the Stens website has only a single photo so you just can't tell.I have ordered a DZE 4026 also from Amazon (which is the actual box that Stens is selling with their own label added). It's $8 cheaper AND the photos show the rivet present. We shall see.Update 11/4: The DZE 4026 arrived today. Sad to say, the photos in the listing for it are wrong, it has no rivets either. At least it is cheaper than the identical one with the Stens label.

J
John
Good quality and turned an old non-starting engine into an easy starting one

Good quality, eliminates the need to deal with the points and condenser.A close air gap makes for easier starts. Often it's one or two pulls now instead of not starting at all.

123
B2B