Skip to content

Carburetor for LCT 03021 and 03022

$ 34.99

Fits the following application

  • Fits LCT 208cc GEN I snow engine

Compatible with

  • LCT 03021, 03022, L10

Specification

  • Gasket not included

Packing

  • One piece per box

Customer Reviews

Based on 11 reviews
91%
(10)
0%
(0)
9%
(1)
0%
(0)
0%
(0)
H
Hayden Felt
Not durable

Handle snapped off as soon as I installed. It works though but now cannot cycle the choke

G
George Stavrakis
Ariens Sno Tek 20"

This was a perfect fit for my Ariens snow blower with the StormForce engine. Replacing the carburetor was very easy and took just a few minutes. The snow blower started on the first pull after installation.

T
THorton
Perfect fit and Ariens 24" sno tek started right up

Perfect fit, all gaskets included. Replaced on snow thrower and it started right up.

B
B.W.
Me likey

It works. Just buy it and be happy

N
NetWorker
Perfect for LCT 208cc Gen 1

I have a Sno-Tek 920402 snow thrower with the LCT 208cc engine. This is the correct carb for that engine. Be careful you con't get a carb that is identical in every way except for the choke linkage. That is what I did when I bought the "HOOAI Carburetor for Ariens 20001368". The choke linkage sticks straight up rather than taking the 90 degree angle like this carb. I returned the HOOAI and bought this. If you want to see this same carb from other manufacturers search for "LCT 03022", which is the LCT part number for this carb.There are no jets to adjust on this. You just install it, hook up the linkage, flood the carb and start it up. In my case I had to remove the spark plug and shoot some starting fluid directly into the cylinder. I always have trouble starting it for the first time in the season, but this is the first time I had to resort to starting fluid. After I got it running I was back to my standard starting procedure: push primer twice, full choke, 1 pull. Runs great.

Customer Reviews

Based on 11 reviews
91%
(10)
0%
(0)
9%
(1)
0%
(0)
0%
(0)
H
Hayden Felt
Not durable

Handle snapped off as soon as I installed. It works though but now cannot cycle the choke

G
George Stavrakis
Ariens Sno Tek 20"

This was a perfect fit for my Ariens snow blower with the StormForce engine. Replacing the carburetor was very easy and took just a few minutes. The snow blower started on the first pull after installation.

T
THorton
Perfect fit and Ariens 24" sno tek started right up

Perfect fit, all gaskets included. Replaced on snow thrower and it started right up.

B
B.W.
Me likey

It works. Just buy it and be happy

N
NetWorker
Perfect for LCT 208cc Gen 1

I have a Sno-Tek 920402 snow thrower with the LCT 208cc engine. This is the correct carb for that engine. Be careful you con't get a carb that is identical in every way except for the choke linkage. That is what I did when I bought the "HOOAI Carburetor for Ariens 20001368". The choke linkage sticks straight up rather than taking the 90 degree angle like this carb. I returned the HOOAI and bought this. If you want to see this same carb from other manufacturers search for "LCT 03022", which is the LCT part number for this carb.There are no jets to adjust on this. You just install it, hook up the linkage, flood the carb and start it up. In my case I had to remove the spark plug and shoot some starting fluid directly into the cylinder. I always have trouble starting it for the first time in the season, but this is the first time I had to resort to starting fluid. After I got it running I was back to my standard starting procedure: push primer twice, full choke, 1 pull. Runs great.

B2B